Xiaomi 4 Lite Gen2 2A charger is intended for charging the second-generation electric scooter. Its output is 24.2 V DC at 2 A, and the scooter connection is DC2.1. This black version has a rectangular adapter body and a separate mains lead with a European plug.

Xiaomi 4 Lite Gen2 2A charger with mains lead

The adapter body sits between the electrical socket and the scooter. One side has the power lead with its European plug, while the charging cable ends in a round DC2.1 connector. This layout differs from an adapter that plugs directly into the wall using pins built into its housing.

• Output voltage: 24.2 V DC.
• Output current: 2 A.
• Scooter connector: DC2.1.
• Mains plug: European.
• Housing: black plastic.
• Included: one adapter with mains and charging leads.

Compatibility and selection

This version is intended for a Xiaomi Electric Scooter 4 Lite (2nd Gen) charging system with matching requirements. Before ordering, compare the previous charger’s output voltage, current and connector with the scooter’s charging specifications. A plug that physically fits does not, by itself, establish the correct electrical match.

24.2 V must be distinguished from 42 V and other voltages used by scooter chargers. This 2 A version should also be distinguished from the 1.5 A variant. The second-generation designation matters; compatibility with other Xiaomi scooters should not be assumed simply because they share the same brand.

Use and package contents

Check both leads and their connectors before use. Position the adapter securely and route the cables so they are not stretched or trapped. Hold the plug rather than pulling on the lead when connecting or disconnecting it. Charge in a dry location and follow the scooter’s operating instructions.

One black charger with the leads shown in the photograph is supplied. A battery and scooter are not included. This is a replacement 24.2 V / 2 A version with a DC2.1 connector and European mains plug.