Xiaomi 4 Lite Gen2 display cover with adhesive replaces the front cover of the dashboard. The kit contains one black rigid plastic cover with a display window and one matching double-sided adhesive frame.

Xiaomi 4 Lite Gen2 display cover with adhesive frame

The cover has one rounded end and a power-button symbol. Its inside includes the profile for the button position. The adhesive is cut to follow the edge of the cover, so the outline does not need to be cut from a full adhesive sheet.

• Compatibility: Xiaomi 4 Lite 2nd Gen electric scooter.
• Cover dimensions: approximately 117.5 × 45.5 mm.
• Adhesive frame outside size: approximately 116.5 × 42.5 mm.
• Cover material: plastic.
• Colour: black.
• Package: 1 cover and 1 double-sided adhesive frame.

Choosing this replacement kit

The set replaces a damaged cover together with the old adhesive layer. These are housing components: the digital display, Bluetooth board and other dashboard electronics are separate parts. If the display does not work, check the electronic components as well as the condition of the cover.

Surface preparation and fitting

After removing the original cover, clean adhesive remains from the mounting surface. Test the position of the new cover before bonding and check that its edges and button position line up. The bonding surface must be clean and dry.

Peel off the red release film when fitting the adhesive frame. Press evenly around the edge of the cover, then check that the button moves and the display can be seen through the window.