Xiaomi 4 Lite Gen2 kickstand supports the second-generation scooter while it is parked. The dark aluminium part has a hinged mounting section and folds towards the scooter before riding. This 150 mm version is a replacement for a broken, bent or hinge-damaged side stand. This is an original replacement part.

The upper mounting plate has two holes with approximately 45 mm between their centres. The plate is about 60.2 mm wide and the holes are about 5 mm in diameter. These measurements matter when selecting a replacement: a shorter stand or a different mounting pattern should not be treated as equivalent simply because it is labelled for Xiaomi scooters.

Xiaomi 4 Lite Gen2 kickstand

• Compatibility: Xiaomi Electric Scooter 4 Lite, 2nd Gen.
• Overall length: approximately 150 mm.
• Mounting hole centre spacing: approximately 45 mm.
• Hole diameter: approximately 5 mm.
• Mounting plate: approximately 60.2 × 17.7 mm.
• Material: aluminium; colour: dark grey.
• Contents: one folding kickstand.

Hinged support and parking position

The lower end is curved and the upper section connects to the mounting plate through a hinge. Open the stand to support the parked scooter, then fold it up before riding. Use the support on firm, level ground. After replacement, check that the scooter rests steadily and does not lean excessively to one side.

Checking the mounting points

Compare the old part’s length and both hole positions before fitting. Inspect the scooter’s mounting points and the fasteners you intend to use. Do not force a mismatched plate into position. Once installed, open and fold the stand several times to check its movement. The frame and surrounding parts must remain clear of the moving support. Select this version for the second-generation 4 Lite; other scooter models can have a different mounting pattern or stand length.