The Xiaomi 4 Pro cable grommet protects the wires as they pass through an opening on the first-generation scooter. It is made of flexible black silicone.
Xiaomi 4 Pro cable grommet
The wires pass through holes in the grommet. The silicone keeps the cables away from the edge of the opening and helps reduce rubbing on the insulation. The grooved outer shape seats in the matching opening. The grommet measures approximately 17 × 16 × 12 mm.
Checking the fit
Match the shape of the old grommet and the layout of its cable holes before fitting this replacement. Once installed, check that it sits around the edge of the opening and leaves enough room for the cables.
Checking the cable pass-through
Note which hole each cable uses before removing the old grommet. A photo of the cable layout and grommet orientation can help when routing the cables through the replacement.
Clear dirt from the pass-through and check the condition of the opening edge. If the old grommet has shifted, look for rub marks on the section of cable insulation that may have touched the edge.
After fitting, trace the full perimeter and check that the silicone has seated evenly. Give the cables room to keep their natural bends, since tension at the opening can pull the grommet loose.



























