Xiaomi 4 Lite Gen2 charging port DC2.1 with cover is a two-part replacement kit for the scooter charging inlet. It contains a socket with red and black wires, a black two-pin internal connector and a grey flexible socket cover. This is an original replacement part.

Xiaomi 4 Lite Gen2 charging port with protective cover

The socket has a flange with two fixing openings. The cover base fits at the charging inlet, and its hinged section closes over the socket when the charger is disconnected. The kit replaces both the electrical inlet and its external cover.

• Compatibility: Xiaomi 4 Lite 2nd Gen electric scooter.
• Charging connector version: DC2.1.
• Internal connector: black, 2 pins.
• Length from socket to internal connector: approximately 166 mm.
• Socket flange width: approximately 23 mm.
• Cover outside dimensions: approximately 29 × 19 mm.
• Package: 1 socket with cable and 1 cover.

Compare the connectors before replacement

Check the charger plug, socket shape and internal connector against the parts on your scooter. This kit is the DC2.1 version. The MI-type inlet and the DC2.1 version must not be selected by scooter model name alone.

Fitting the inlet and cover

Disconnect the scooter power before replacement. Align the cover base and socket with the mounting positions. Route the cable without trapping it and check the internal connector contact arrangement and polarity.

The closed cover should sit against the socket. The kit does not include a charger, separate battery lead or a fixing-screw set. After fitting, check charging operation using a charger that matches the scooter and this connector.