Xiaomi 4 Lite Gen2 MI socket with cable replaces the scooter charging inlet. This MI-type version has a black socket housing, a flange with two mounting openings and red and black wires ending in a black two-pin internal connector. This is an original replacement part.

Xiaomi 4 Lite Gen2 MI socket with 18 cm cable

The set replaces the charging socket and its short connection lead together. The flange locates the socket in the case wall, while the internal connector plugs into the scooter wiring. The shape and latch of the black connector must match the existing wiring connection.

• Compatibility: Xiaomi 4 Lite 2nd Gen electric scooter.
• Charging inlet version: MI type.
• Cable length: approximately 18 cm.
• Internal connector: black, 2 pins.
• Mounting flange width: approximately 23.3 mm.
• Mounting hole centre spacing: approximately 17 mm.
• Package: 1 socket with cable.

Select the matching connector version

Compare both the external charger plug and the internal scooter connector with the product photographs. The MI-type inlet and DC2.1 version differ. Leads with similar-looking external sockets may also have different internal plugs.

Replacement and cable routing

Disconnect the scooter power before replacement. Compare the contact arrangement and polarity, then fit the lead without stretching it or trapping it against a case edge. Matching connector colour alone is not enough to confirm the wiring.

The set contains the socket and lead; the external protective cover and charger are separate parts. Check charging operation only with a charger that matches this MI-type socket and the specific scooter.