Xiaomi 4 Lite Gen2 DE taillight has a vertical red lens and a black housing with an angled rear profile. A mounting stud is fitted at the back, and the approximately 429 mm cable ends in a white two-pin connector. This is an original replacement part.

Xiaomi 4 Lite Gen2 DE taillight for vertical mounting

This version fits the DE rear arrangement with a raised lamp support. The narrow lens and projecting rear housing must match the mudguard mounting position. The lamp is supplied separately from the fender body.

• Compatibility: Xiaomi 4 Lite 2nd Gen, DE configuration.
• Mounting orientation: vertical.
• Lens dimensions: approximately 51 × 30 mm.
• Cable length: approximately 429 mm.
• Connector: white, 2 pins.
• Fixing: rear mounting stud.
• Package: 1 lamp with cable.

Compare the light shape

This lamp differs from the horizontal elongated 4 Lite Gen2 rear light and the round lights used on some other Xiaomi models. Compare the lens outline, stud position and connector before selecting it. Colour or the beginning of the model name alone will not identify the correct version.

Routing and connection

Run the cable along its intended route, clear of the tyre and without trapping it under fixings. Check the internal connector contacts and wire arrangement before connecting.

Once the lamp is secure, switch on the scooter and check its operation. If it remains unlit, inspect the incoming wiring as well. The mudguard and its supports are not included with this lamp.