Xiaomi 4 Lite Gen2 deck mat covers the standing platform of the second-generation electric scooter. Its black rubber surface has lengthwise grooves and a shaped outline that follows the model’s deck. This adhesive replacement is suitable for renewing a worn, damaged or lifting original platform covering. This is an original replacement part.

The mat is approximately 606 mm long and 162 mm across its widest section. One end tapers, so both the overall dimensions and the complete outline matter when selecting the part. The flexible rubber forms the platform’s upper covering, while a removable release sheet protects the adhesive layer underneath. The grooved upper face is the surface that contacts your footwear.

Xiaomi 4 Lite Gen2 deck mat

• Compatibility: Xiaomi Electric Scooter 4 Lite, 2nd Gen.
• Part type: shaped adhesive deck covering.
• Length: approximately 606 mm; maximum width: approximately 162 mm.
• Material: rubber.
• Colour: black.
• Surface: lengthwise grooves.
• Contents: one deck mat with an adhesive backing.

Deck outline and upper surface

Compare the tapered end and side edges with the scooter’s platform before fitting. First-generation 4 Lite scooters and other Xiaomi models can have a different deck outline. This shaped rubber pad replaces the upper platform covering. Its form and material should be considered separately from a thin decorative deck sticker.

Preparing the deck and applying the mat

Remove the old covering and remaining adhesive so that raised patches do not remain underneath the replacement. The deck surface should be clean and dry. Position the new mat with its release sheet still attached to check the outline first. During application, remove the protective sheet gradually and press the covering down from one end. Check that the edges sit against the deck without stretching the rubber to compensate for incorrect alignment.