Xiaomi 4 Lite Gen2 display adhesive secures the dashboard cover in place. This double-sided strip is cut into a frame with one rounded end and one straight end. It replaces the adhesive layer when the display cover has been removed for a repair.

Xiaomi 4 Lite Gen2 display adhesive for the dashboard cover

The pre-cut outline lets you check the position against the cover before bonding. Its open centre leaves the middle of the display clear, and there is no need to cut the shape from a full adhesive sheet. The red film protects the adhesive before fitting; it is removed during installation.

• Use: bonding the dashboard cover.
• Type: pre-cut, double-sided adhesive frame.
• Outer dimensions: approximately 116.5 × 42.5 mm.
• Compatibility: Xiaomi 4 Lite 2nd Gen electric scooter.
• Package: 1 adhesive frame.

Prepare both surfaces before fitting

Remove the remains of the old strip from the cover and its seating surface. Clean and dry both surfaces, then check the outline and orientation before peeling off the protective film. Press the cover evenly around its edge so that the strip contacts the full bonding area.

Compare the shape and dimensions with your existing dashboard cover before ordering this scooter display part. The package contains the adhesive frame only; the cover, display and circuit board are separate components. This strip is a fixing component and does not establish a certified waterproof rating for the dashboard.