Xiaomi 4 Lite Gen2 charging port DC2.1 with cable replaces the charging connection on the second-generation scooter. The assembly includes a black panel-mounted socket, red and black wires, and a black two-pin internal connector. Select this version by the shape of the existing socket and the connector in the scooter’s wiring.

The overall length is approximately 166 mm. The socket’s outer mounting flange is about 23 mm wide and has a fixing hole at each end. This width is not the distance between the hole centres. The DC2.1 designation identifies the charging socket version, so the scooter’s model name alone should not be used to treat different charging plugs as equivalent.

Xiaomi 4 Lite Gen2 charging port

• Compatibility: Xiaomi Electric Scooter 4 Lite, 2nd Gen, with a DC2.1 port.
• Socket version: DC2.1.
• Internal connector: black, two-pin.
• Overall length including connectors: approximately 166 mm.
• Socket mounting flange width: approximately 23 mm.
• Wires: red and black.
• Contents: one charging socket and cable assembly.

Selecting the connectors and mounting shape

Compare the external charging plug, the internal connector outline and the pin arrangement with the removed part. Charging ports from different Xiaomi generations can look similar while using a different internal connector. This version has a black two-pin housing. Select any required protective socket cap separately according to the scooter’s original arrangement.

Replacement and cable routing

Replace the port with the scooter switched off and retain the original wiring route. Check the contacts and polarity against the existing wiring before connection. Keep the cable clear of body edges and avoid tension at the connector. After fitting, check that the flange sits correctly, the internal plug is secure and the charger’s plug enters the socket normally.